Hyline Offroad’s Tube Step Rockers have been designed with the offroader in mind. These Rockers are built with solid .135” (1/8” +) steel, beefy 1 3/4” DOM tubing cut on a 30 degree angle for better clearance and deflection. Rockers feature flat bottoms for optimal ground clearance. The design attaches directly to the body mounts allowing you to tie in a cage if needed. All Rockers are E-Coated then Powder Coated with a Lightly Textured Black finish.Tools Required:Ratchet, 9/16' deep socket, 12' extension, 16mm socket, floor jack, approx. 18' block of wood, hand drill, 25/64' drill bit, 3/8' transfer punch, C-Clamp or Vise-Grip Clamp, light duty hammer, 7/32' Allen wrench, 8mm Allen wrench and safety glasses.Parts Included:Driver side and Passenger Side Tube Step Rockers, thick steel back up plates, Paint protecting gasketing and all stainless steel hardware.