Dana 44 Knuckle Bolt Kit Reid Racing Chevy Artec Industries

44 Knuckle Bolt Kit. This Knuckle Bolt Kit is designed to work specifically with our 44 High Steer Arms to both strengthen the entire knuckle and steering as well as provide options For mounting your steering. Whether you just need to re-enforce your knuckle or want to run your tie rod Inch double sheer, this Kit is designed with to fit multiple different steering configurations. Refer to the diagram below For some of the possibilities. The Knuckle Bolt Kit includes one 3/4 inch grade 8 bolt, one 3/4 inch all- steel mechanical locking nut, one 1.25 inch outer diameter, .250 inch wall sleeve, and one knuckle specific bracket.

Features:

• Sold as Kit
• Knuckle Style: Reid Racing Chevy
• Side: Driver Side
• Two Kits Will Need To Be Purchased For A Pair Of High Steer Arms.
• This Kit Will Require Welding The Sleeve To The Bracket For Best Fitment.
• One Kit Will Need To Be Purchased For A Pair Of High Steer Arms.
• Requires 1 inch Body Lift To Get Proper Separation Between Links and High Enough Ground Clearance.
• Please choose the Style knuckle you have: Reid Racing Chevy. Other knuckles will be available shortly.
• Factory tie rod end holes on the knuckle will need to be drilled to a 3/4 inch hole For this Kit to work.
• This Will Require Use Of Basic Drilling Tools
• 3/4 inch - 16 tpi 4 inch long Grade 8 bolt
• 3/4 inch - 16 tpi All-steel Mechanical Lock nut
• Machined 1.25 inch OD - .250 inch wall DOM sleeve
• Knuckles Specific Bracket ensures proper fitment
• Increases overall knuckle and steering strength
• Optional Double sheer tab
• Choose to mount over or under arm