SwayLOC for Jeep Cherokee XJ. SwayLOC is the original dual-rate sway bar that provides different control rates for off-road and on-road use.
SwayLOC improves balance and control while providing full articulation during off-road use. It also delivers near OEM ride quality during on-road use that is more firm than the stock sway bar.
The dual rates are achieved through the use of two concentric torsion bars. SwayLOC uses a simple latching mechanism to easily change between off-road and on-road use without having to struggle with disconnect links or having to be on level ground.
The proven cam latching system guarantees that SwayLOC engages in the correct position for on-road use and disengages for off-road use when chassis flex releases pressure on the latch.
The Manual Flip a Lever version is simply that, flip the lever on the latch rearward sets the latch to disengage for low off-road resistance. Turning it off sets it to engage for high on-road resistance.
The spring in the latch allows you to select the operation by flipping the lever and the spring will pull the latch open or slide engaged when it should.
The remote-controlled version works using an air operated latch (1). The latch is controlled by an in-cab switch. Turning on the lighted in-cab toggle switch automatically sets the latch to disengage for low off-road resistance.
Turning it on sets it to disengage for low off-road resistance. SwayLOC for XJ mounts with included brackets to the factory swaybar mounting area, and forward up to the back edge of the stock bumper. (Custom bumpers may require some trimming to clear).
Notes
1.Requires an air supply with a minimum of 50 PSI to disengage the latch. No air pressure is used to engage and sustain the latch for on-road use.
Details:
- Manual Option
- 84-01 Cherokee XJ
- Improves balance and control
- Full articulation during off-road use
- Delivers near OEM ride quality during on-road use
- More firm than the stock sway bar
- Dual rates are achieved through the use of two concentric torsion bars
- Engages in the correct position for on-road use and disengages for off-road use when chassis flex releases pressure on the latch
- Spring in the latch allows you to select the operation by flipping the lever and the spring will pull the latch open or slide engaged when it should
- Some aftermarket bumpers or skid plates might require modifications
- Multi-piece linkage kit is included to create a variety of linkage lengths to fit most lift heights from stock to over 10 inch
